ELATUR® DPT is our new fast fuser for special PVC applications, like flooring, wall coverings and films and especially effective when used in combination with ELATUR® CH.
Regulations on indoor air emissions from building products in Europe are quite stringent (VOC and SVOC limits)
Most of the current fast fusers at least partly contain SVOC
ELATUR® DPT is > 99% without SVOC.
Excellent gelation behavior
The gelation behavior of an ELATUR® CH / DPT mixture 2:1 is almost on VESTINOL® 9 (DINP) level.
ELATUR® DPT helps to maintain the low viscosity level of ELATUR® CH plastisols.
Good storage and handling properties
Many competitive products require heating equipment for storing and pumping.
ELATUR® DPT can be stored without heating at temperatures down to <– 20 °C.
Benefits to our customers
- High gelation/fusing power and efficiency
- Excellent cold storage properties no freezing down to -20°C
- Low plastisol viscosity
- Protected by Evonik IP